论文 1. Z. Li, J. Pan, F. Li, M. Nauman, W. Yang. Thermochemical distribution and emission characteristics of CH4/air premixed laminar flames with wall effects under varying ammonia ratios. Fuel 2026, 407. 2. W. Fu, J. Pan, B. Fan, Z. Zhang, Q. Lu, Y. Zhang, W. Yang. Thermodynamic analysis and ignition parameter optimization in a hydrogen/ammonia dual direct-injection rotary engine. Applied Thermal Engineering 2026, 302, 131814. 3. P. Li, J. Pan, B. Fan, E. Quaye, Y. Zhang, J. Weng, W. Yang. The effect of dual injection strategy on fuel distribution and combustion characteristics in ammonia/hydrogen rotary engines. Energy 2025, 332, 137119. 4. P. Li, J. Pan, B. Fan, M. Nauman, C. Jiang, Y. Chen, W. Yang. Effect of blending ratio and equivalence ratio on combustion process of ammonia/hydrogen rotary engine. Applied Thermal Engineering 2025, 274. 5. J. Guo, J. Pan, Q. Lu, C. Li, M. Nauman, C. Jiang, W. Yang. The influence of the periodic longitudinal concentration gradient on the detonation re-initiation behind the pre-detonation tube. Acta Astronautica 2025. 6. E. Quaye, J. Pan, Q. Lu, Y. Zhang, W. Yang, M. Nauman. Geometrical optimization of premixed hydrogen-air combustion in a novel counter-flow preheating micro-combustor. Energy 2024, 313, 133897. 7. J. Guo, Y. Liu, J. Pan, C. Jiang, Y. Zhu, J. Li, A. Ojo. Propagation characteristics and re-initiation mechanism of detonation in bifurcated tube. International Journal of Hydrogen Energy 2024, 61, 1120-1132. 8. J. Zhu, J. Pan, F. Zhang, T. Zirwes, A. Ojo, F. Li. Near-wall dynamics of premixed methane/air flames. Fuel 2023, 331. 9. J. Pan, J. Hua, J. Yao, A. Ojo. Effect of Intake Conditions and Nozzle Geometry on Spray Characteristics of Group-Hole Nozzle. Energy Engineering: Journal of the Association of Energy Engineering 2023, 120, 1541-1562. 10. J. Jin, J. Pan, T. Cao. Effect of balance valve on exhaust pulse energy of a heavy-duty diesel engine equipped an asymmetric twin-scroll turbine. Proceedings of the Institution of Mechanical Engineers Part D-Journal of Automobile Engineering 2023, 237, 2899-2912. 11. C. Jiang, J. Pan, J. Weng, J. Li, E. Quaye. Role of concentration gradient in the re-initiation of H2/O2 detonation in a 90° bifurcated channel. Aerospace Science and Technology, 2022. 120: p. 107281. 12. B. Fan, Y. Zeng, J. Pan, J. Fang, S. Adeniyi, Y. Wang. Evaluation and analysis of injection strategy in a peripheral ported rotary engine fueled with natural gas/hydrogen blends under the action of apex seal leakage. Fuel, 2022. 310: p. 122315. 13. Y. Wang, J. Pan, J. Wang, Q. Lu, Y. Liu, E. Quaye, The characteristics of methane/oxygen premixed flame dynamics in a meso-scale reactor under fuel rich condition. Energy, 2021. 232. 14. J. Pan, B. Cheng, J. Tao, B. Fan, Y. Liu, P. Otchere. Experimental Investigation on the Effect of Blending Ethanol on Combustion Characteristic and Idle Performance in a Gasoline Rotary Engine. Journal of Thermal Science, 2021. 30(4): p. 1187-1198. 15. 倪靖, 潘剑锋, 姜超, 陈祥,张顺. 掺氢比对甲烷-氧气爆轰特性的影响. 爆炸与冲击, 2020. 40(04): p. 25-33. 16. J. Pan, C. Zhang, Z. Pan, D. Wu, Y. Zhu, Q. Lu and Y. Zhang, Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor. Energy, 2020. 190: p. 116465. 17. P. Otchere, J. Pan, B. Fan, W. Chen, Y. Lu and L. Jianxing, Mixture formation and combustion process of a biodiesel fueled direct injection rotary engine (DIRE) considering injection timing, spark timing and equivalence ratio – CFD study. Energy Conversion and Management, 2020. 217: p. 112948. 18. J. Ni, J. Pan, Y. Zhu, C. Jiang, J. Li and E.K. Quaye, Effect of arc obstacles blockage ratio on detonation characteristics of hydrogen-air. Acta Astronautica, 2020. 170: p. 188-197. 19. Y. Lu, J. Pan, B. Fan, P. Otchere, W. Chen and B. Cheng, Research on the application of aviation kerosene in a direct injection rotary engine – Part 2: Spray combustion characteristics and combustion process under optimized injection strategies. Energy Conversion and Management, 2020. 203: p. 112217. 20. B. Fan, Y. Zhang, J. Pan, P. Otchere, Y. Wang and Y. Zeng, The formation mechanisms of flow field in a compound intake ported rotary engine considering apex seal leakage. Environmental Progress & Sustainable Energy, 2020. 21. W. Chen, J. Pan, Q. Zuo, J. Zhang, Z. Wang, B. Zhang, G. Zhu and B. Fan, Combustion performance improvement of a diesel fueled Wankel stratified-charge combustion engine by optimizing assisted ignition strategy. Energy Conversion and Management, 2020. 205: p. 112324. 22. Y. Zhang, J. Pan, A. Tang, Q. Lu, Z. Zha and S. Bani, Effects of inlet parameters on combustion characteristics of premixed CH4/Air in micro channels. Journal of the Energy Institute, 2019. 92(3): p. 824-834. 23. Z. Pan, K. Chen, J. Qi, P. Zhang, Y. Zhu, J. Pan and M. Gui, The propagation characteristics of curved detonation wave: Experiments in helical channels. Proceedings of the Combustion Institute, 2019. 37(3): p. 3585-3592. 24. J. Pan, Y. Zhang, Q. Lu, X. Shao, E.K. Quaye and Y. Zhu, Numerical study on stability and influencing factors of heterogeneous reaction for hydrogen/oxygen mixture in planar catalytic micro combustor. International Journal of Hydrogen Energy, 2019. 44(29): p. 15587-15597. 25. J. Pan, N. Miao, Z. Lu, Q. Lu, W. Yang, Z. Pan and Y. Zhang, Experimental and numerical study on the transition conditions and influencing factors of hetero-/homogeneous reaction for H2/Air mixture in micro catalytic combustor. Applied Thermal Engineering, 2019. 154: p. 120-130. 26. Y. Lu, J. Pan, B. Fan, P. Otchere, W. Chen and B. Cheng, Research on the application of aviation kerosene in a direct injection rotary engine-Part 1: Fundamental spray characteristics and optimized injection strategies. Energy Conversion and Management, 2019. 195: p. 519-532. 27. Q. Lu, J. Gou, J. Pan, Y. Zhang, J. Zhu and E.K. Quaye, Comparison of the effect of heat release and products from heterogeneous reaction on homogeneous combustion of H2/O2 mixture in the catalytic micro combustor. International Journal of Hydrogen Energy, 2019. 44(59): p. 31557-31566. 28. J. Li, J. Pan, C. Jiang, J. Ni, Z. Pan and P. Otchere, Effect of hydrogen addition on the detonation performances of methane/oxygen at different equivalence ratios. International Journal of Hydrogen Energy, 2019. 44(51): p. 27974-27983. 29. W. Chen, J. Pan, Y. Liu, B. Fan, H. Liu and P. Otchere, Numerical investigation of direct injection stratified charge combustion in a natural gas-diesel rotary engine. Applied Energy, 2019. 233-234: p. 453-467. 30. Y. Zhang, J. Pan, Y. Zhu, S. Bani, Q. Lu, J. Zhu and H. Ren, The effect of embedded high thermal conductivity material on combustion performance of catalytic micro combustor. Energy Conversion and Management, 2018. 174: p. 730-738. 31. Y. Zhang, J. Pan, Z. Lu, A. Tang, Y. Zhu and S. Bani, The characteristics of pure heterogeneous reaction for H2/Air mixture in the micro-combustors with different thermophysical properties. Applied Thermal Engineering, 2018. 141: p. 741-750. 32. Z. Pan, J. Qi, J. Pan, P. Zhang, Y. Zhu and M. Gui, Fabrication of a helical detonation channel: Effect of initial pressure on the detonation propagation modes of ethylene/oxygen mixtures. Combustion and Flame, 2018. 192: p. 1-9. 33. J. Pan, W. Chen, W. Yang, M. Xiao, Y. Zhu and B. Fan, Effects of intake and exhaust valve timing on the performance of an air-powered rotary engine. Environmental Progress & Sustainable Energy, 2018. 37(4): p. 1462-1474. 34. B. Fan, Y. Zhang, J. Pan, Y. Liu, W. Chen, P. Otchere, A. Wei and R. He, The influence of hydrogen injection strategy on mixture formation and combustion process in a port injection (PI) rotary engine fueled with natural gas/hydrogen blends. Energy Conversion and Management, 2018. 173: p. 527-538. 35. B. Fan, J. Pan, Y. Liu, Y. Zhu, Z. Pan, W. Chen and P. Otchere, Effect of hydrogen injection strategies on mixture formation and combustion process in a hydrogen direct injection plus natural gas port injection rotary engine. Energy Conversion and Management, 2018. 160: p. 150-164. 36. B. Fan, J. Pan, Y. Liu, W. Chen, Y. Lu and P. Otchere, Numerical investigation of mixture formation and combustion in a hydrogen direct injection plus natural gas port injection (HDI + NGPI) rotary engine. International Journal of Hydrogen Energy, 2018. 43(9): p. 4632-4644. 37. W. Chen, J. Pan, B. Fan, P. Otchere, N. Miao and Y. Lu, Numerical investigation of dual-fuel injection timing on air-fuel mixing and combustion process in a novel natural gas-diesel rotary engine. Energy Conversion and Management, 2018. 176: p. 334-348. 38. S. Bani, J. Pan, A. Tang, Q. Lu and Y. Zhang, Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system. Energy, 2018. 157: p. 969-978. 39. S. Bani, J. Pan, A. Tang, Q. Lu and Y. Zhang, Micro combustion in a porous media for thermophotovoltaic power generation. Applied Thermal Engineering, 2018. 129(Supplement C): p. 596-605. 40. Y. Zhang, J. Pan, A. Tang, Y. Liu, Z. Pan, Q. Lu and P. Otchere, Effect of gas-phase reaction on catalytic reaction for H2/O2 mixture in micro combustor. International Journal of Hydrogen Energy, 2017. 42(26): p. 16855-16865. 41. Z. Pan, K. Chen, J. Pan, P. Zhang, Y. Zhu and J. Qi, An experimental study of the propagation characteristics for a detonation wave of ethylene/oxygen in narrow gaps. Experimental Thermal and Fluid Science, 2017. 88: p. 354-360. 42. J. Pan, J. Zhu, Q. Liu, Y. Zhu, A. Tang and Q. Lu, Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor. International Journal of Hydrogen Energy, 2017. 42(36): p. 23207-23217. 43. J. Pan, R. Zhang, Q. Lu, Z. Zha and S. Bani, Experimental study on premixed methane-air catalytic combustion in rectangular micro channel. Applied Thermal Engineering, 2017. 117: p. 1-7. 44. J. Pan, Q. Lu, S. Bani, A. Tang, W. Yang and X. Shao, Hetero-/homogeneous combustion characteristics of premixed hydrogen-air mixture in a planar micro-reactor with catalyst segmentation. Chemical Engineering Science, 2017. 167: p. 327-333. 45. Q. Lu, J. Pan, W. Yang, A. Tang, S. Bani and X. Shao, Interaction between heterogeneous and homogeneous reaction of premixed hydrogen–air mixture in a planar catalytic micro-combustor. International Journal of Hydrogen Energy, 2017. 42(8): p. 5390-5399. 46. B. Fan, J. Pan, W. Yang, Z. Pan, S. Bani, W. Chen and R. He, Combined effect of injection timing and injection angle on mixture formation and combustion process in a direct injection (DI) natural gas rotary engine. Energy, 2017. 128: p. 519-530. 47. B. Fan, J. Pan, W. Yang, Y. Liu, S. Bani and W. Chen, Numerical investigation of the effect of injection strategy on mixture formation and combustion process in a port injection natural gas rotary engine. Energy Conversion and Management, 2017. 133: p. 511-523. 48. B. Fan, J. Pan, W. Yang, W. Chen and S. Bani, The influence of injection strategy on mixture formation and combustion process in a direct injection natural gas rotary engine. Applied Energy, 2017. 187: p. 663-674. 49. W. Chen, J. Pan, B. Fan, Y. Liu and O. Peter, Effect of injection strategy on fuel-air mixing and combustion process in a direct injection diesel rotary engine (DI-DRE). Energy Conversion and Management, 2017. 154: p. 68-80. 50. 潘剑锋, 刘启胜, 卢青波,潘振华.催化微燃烧室内氢气和氧气预混合燃烧特性. 农业机械学报, 2016. 47(02): p. 357-363. 51. Q. Lu, J. Pan, W. Yang, Z. Pan, A. Tang and Y. Zhang, Effects of products from heterogeneous reactions on homogeneous combustion for H2/O2 mixture in the micro combustor. Applied Thermal Engineering, 2016. 102: p. 897-903. 52. Q. Lu, J. Pan, S. Hu, A. Tang and X. Shao, Hetero-/homogeneous combustion of premixed hydrogen–oxygen mixture in a micro-reactor with catalyst segmentation. International Journal of Hydrogen Energy, 2016. 41(28): p. 12387-12396. 53. B. Fan, J. Pan, W. Yang, Y. Zhu and W. Chen, Effects of hydrogen blending mode on combustion process of a rotary engine fueled with natural gas/hydrogen blends. International Journal of Hydrogen Energy, 2016. 41(6): p. 4039-4053. 54. 潘剑锋, 陈瑞, 范宝伟, 姚嘉琪,肖曼. LPG转子发动机缸内燃烧影响因素研究. 农业机械学报, 2015. 46(01): p. 329-337. 55. 范宝伟, 潘剑锋, 唐爱坤, 潘振华, 薛宏.进气相位对天然气转子发动机流场和燃烧过程的影响. 农业机械学报, 2015(07): p. 286-293. 56. 范宝伟, 潘剑锋, 刘杨先, 卢青波, 肖曼, 薛宏. 转子发动机流场的测试和数值模拟. 工程热物理学报, 2015. 36(08): p. 1835-1840. 57. 范宝伟, 潘剑锋, 黄俊, 肖曼,姚嘉琪.燃烧室结构对天然气转子发动机燃烧过程的影响. 机械工程学报, 2015. 51(22): p. 141-151. 58. J.F. Pan, D. Wu, Y.X. Liu, H.F. Zhang, A.K. Tang and H. Xue, Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor. Applied Energy, 2015. 160: p. 802-807. 59. B.W. Fan, J.F. Pan, Z.H. Pan, A.K. Tang, Y.J. Zhu and H. Xue, Effects of pocket shape and ignition slot locations on the combustion processes of a rotary engine fueled with natural gas. Applied Thermal Engineering, 2015. 89(0): p. 11-27. 60. B. Fan, J. Pan, A. Tang, Z. Pan, Y. Zhu and H. Xue, Experimental and numerical investigation of the fluid flow in a side-ported rotary engine. Energy Conversion and Management, 2015. 95(0): p. 385-397. 61. B. Fan, J. Pan, Y. Liu and Y. Zhu, Effects of ignition parameters on combustion process of a rotary engine fueled with natural gas. Energy Conversion and Management, 2015. 103(0): p. 218-234. 62. Baowei Fan, Jianfeng Pan, Wenming Yang, Hui An, Aikun Tang, Xia Shao, Hong Xue, Effects of different parameters on the flow field of peripheral ported rotary engines. Engineering Applications of Computational Fluid Mechanics, 2015. 9(1): p. 445-457. 63. 邵霞, 潘剑锋, 薛宏, 王谦,唐爱坤, 微通道内气体库埃特流动的DSMC模拟. 工程热物理学报, 2013(09): p. 1752-1754. 64. 潘剑锋, 范宝伟, 陈瑞, 卢青波, 唐爱坤, 邵霞,王谦, 点火位置对天然气转子发动机燃烧的影响. 内燃机工程, 2013. v.34;No.156(01): p. 1-7. 65. 潘剑锋, 周俊, 唐爱坤, 邵霞,薛宏, 微尺度燃烧过程中传热准则数分析. 农业机械学报, 2011(12): p. 197-201+219. 66. 潘剑锋, 吴庆瑞, 薛宏, 万彦辉,周俊, 微平板式燃烧室内催化燃烧的试验研究. 工程热物理学报, 2011(08): p. 1430-1432. 67. 潘剑锋, 范宝伟, 吴庆瑞, 李晓春, 唐爱坤,薛宏, 微尺度下氢氧预混合气催化燃烧的研究. 机械工程学报, 2011(24): p. 111-116. 68. 潘剑锋, 赵金刚, 李德桃, 薛宏, 唐爱坤,张梦云, 改装直喷式柴油机中生物柴油喷雾燃烧过程试验研究. 内燃机工程, 2010. v.31;No.140(03): p. 11-16. 69. 潘剑锋, 李晓春, 唐爱坤,薛宏, 亚毫米平板式微燃烧室性能的影响因素研究. 中国机械工程, 2010. v.21;No.305(17): p. 2119-2122. 70. J. Pan, W. Yang, A. Tang, S. Chou, L. Duan, X. Li and H. Xue, Micro combustion in sub-millimeter channels for novel modular thermophotovoltaic power generators. Journal of Micromechanics and Microengineering, 2010. 20(12). 编著及参编主要教材专著 1. 《微尺度燃烧及其应用》.科学出版社, 2017. 2. 《燃烧学理论基础及其应用》第二版. 江苏大学出版社, 2021. |
