1. 传热学,机械工业出版社,2021. 2. 微尺度燃烧及其应用,科学出版社,2017. 3. Characterization and experimental assessment of hybrid cooling strategy for lithium-ion batteries by integrating microencapsulated phase change materials. International Journal of Heat and Mass Transfer, 2024. 4. Experimental analysis and multi-objective optimization of flame dynamics and combustion performance in methane-fueled slit-type combustors. Applied Energy, 2024. 5. Design of innovative phase-change cold storage refrigerator and simulation analysis of discharging progress. Energy, 2024. 6. Heat transfer characteristics of non-uniform channels flat heat pipe with micro pillar arrays and its application in power battery cooling. Applied Thermal Engineering, 2024. 7. Optimization and working performance analysis of liquid cooling plates in refrigerant direct cooling power battery systems. International Journal of Heat and Mass Transfer, 2024. 8. Promoting effect and kinetic analysis of Fe-Co bimetallic doping on the LaMnO3 catalytic activity for methane combustion. Chemical Engineering Journal, 2024. 9. Analysis of entropy generation and exergy efficiency of the methane/dimethyl ether/air premixed combustion in a micro-channel. International Journal of Heat and Mass Transfer, 2024. 10. Combustion and emission performance evaluation in ammonia/hydrogen-powered systems with baffle and secondary injection applied. Fuel, 2024. 11. Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt-Cu/HZSM-5/cordierite bimetallic catalysts. Case Studies in Thermal Engineering, 2024. 12. Flame visualization and spectral analysis of combustion instability in a premixed methane/air-fueled micro-combustor. Energy, 2024. 13. Flame stability enhancement and output performance optimization of a dual reaction zone recirculating micro-combustor, Applied Thermal Engineering, 2025. 14. Insights into ignition, flame propagation, and emission characteristics of ammonia/hydrogen combustion under intermediate-to-high temperatures and high pressures. Chemical Engineering Journal, 2025. 15. A systematic review of enhancing stabilization performance and mitigating thermoacoustic instability in renewable ammonia turbulent combustion. Renewable and Sustainable Energy Reviews, 2025. 16. A study on the synergistic effects of compressor speed and refrigerant charge amount in R744 transcritical refrigeration cycle. Applied Thermal Engineering, 2025. 17. Cooling performance enhancement and economic analysis of air conditioner systems integrated with phase change materials for telecommunication base station. Energy, 2025. 18. Experimental analysis of critical operating parameters on heat storage and oxidation performances in a VAM-fueled flow-reversal reactor. Energy, 2025. 19. Development of inorganic phase change material and cold charging performance analysis based on cold storage refrigerator. Applied Thermal Engineering, 2025. 20. Flame stability enhancement and output performance optimization of a dual reaction zone recirculating micro-combustor. Applied Thermal Engineering, 2025. 21. Efficient combustion of low concentration methane over perovskite/BN-La: Enhanced catalytic performance and fundamental kinetic analysis. Powder Technology, 2026. 22. Thermodynamic Analysis of a Liquid Air Energy Storage System Integrated with Liquefied Natural Gas Cold Energy Recovery. Applied Thermal Engineering, 2026. 23. Construction of electrostatically self-assembled pomelo peel/carbon nanotube aerogel and the modulation of thermal performance in composite phase change material. Biomass and Bioenergy, 2026. 24. Experimental investigation of flow and heat transfer characteristics in single-tube liquid-solid fluidized bed heat exchangers. International Journal of Heat and Mass Transfer, 2026. 25. CFD-DEM simulation of liquid-solid two-phase flow characteristics in slender straight pipes. Powder Technology, 2026. 26. Material Evaluation and Charging–Discharging Characteristics of Packed-Bed Cold Energy Recovery Units. Energy Technology, 2026. 27. Experimental study on the conversion characteristics and performance enhancement of foam-supported spinel catalysts for low-concentration hydrogen. Chemical Engineering & Processing: Process Intensification, 2026. |