1. 专著：潜水搅拌机理论、设计及工程应用, 科学出版社，2016. 2. 编著：能源与动力工程控制基础，江苏大学出版社，2018.
1. 污水处理搅拌机的数值模拟与实验研究. 江苏大学, 2010；（学位论文） 2. 潜水搅拌机射流特性及实验研究. 江苏大学, 2012；（学位论文） 3. Flow instability in mixed-flow/axial-flow pump: A review of relationship between tip leakage flow distortion and rotating stall. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2025.2,SCIE/EI; 4. Blade wear intensity of a centrifugal pump based on an improved four-way coupling method. PHYSICS OF FLUIDS, 2025.4, SCIE/EI; 5. Energy dissipation of solid-liquid flow in a centrifugal pump based on an improved four-way coupling method. PHYSICS OF FLUIDS, 2025.1, SCIE/EI; 6. Vortical evolution and instability mechanisms in submersible mixer rotating jets. PHYSICS OF FLUIDS, 2025.8, SCIE/EI; 7. Three-dimensional computations of irreversibility and mixed convection flow within an enclosure with various thermal conditions. PHYSICS OF FLUIDS, 2025.9, SCIE/EI; 8. PIV investigation of stalled flow field near the blade rim region of mixed-flow pump under different tip clearances. FLOW MEASUREMENT AND INSTRUMENTATION，2024.10,SCIE/EI; 9. Research Progress of Advanced Design Method, Numerical Simulation, and Experimental Technology of Pumps in Deep-Sea Resource Exploitation, Water (Switzerland), 2024.7,SCIE/EI; 10.Research on Efficiency Improvement Technology of Wide Range Centrifugal Pump Based on Genetic Algorithm and Internal Flow Loss Diagnosis, WATER, 2024.12, SCIE/EI; 11.Comparative study on the energy decay patterns and vortex characteristics of submersible thrusters under different structural configurations. PHYSICS OF FLUIDS, 2024.12, SCIE;EI 12. Study on the particle dynamic characteristics in a centrifugal pump based on an improved computational fluid dynamics-discrete element model. PHYSICS OF FLUIDS, 2024.12, SCIE/EI 13. Numerical simulation of cryogenic cavitating flow by an extended transport-based cavitation model with thermal effects. CRYOGENICS,2023.07,SCIE; 14.Influence of installation height of a submersible mixer on solid?liquid two?phase flow field. Frontiers in Energy Research, 2023.1, SCIE/EI; 15. A study on the multi-objective optimization method and characteristic analysis of installation locations of submersible mixer for sewage. Frontiers in Energy Research, 2023.1, SCIE/EI; 16. Design Optimization of Hydraulic Machinery Based on ISIGHT Software: A Review of Methods and Applications. Water (Switzerland), 2023.6, SCIE/EI; 17. Large eddy simulation of partially premixed flames with inhomogeneous inlets based on the DTF combustion model. Aerospace Science and Technology, 2023.8, SCIE/EI; 18. Research on the Characteristics of the Solid-Liquid Two-Phase Flow Field of a Submersible Mixer Based on CFD-DEM. ENERGIES, 2022.8, SCIE/EI; 19. Review of Numerical Simulation Research on Submersible Mixer for Sewage. FRONTIERS IN ENERGY RESEARCH, 2022.2, SCIE/EI; 20. Influence of different blade numbers on the performance of "saddle zone" in a mixed flow pump. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2022.5, SCIE/EI; 21. Effect of blade thickness on rotating stall of mixed-flow pump using entropy generation analysis. Energy, 2021.12, SCIE/EI; 22. Diagnosis of internal energy characteristics of mixed-flow pump within stall region based on entropy production analysis model. International Communications in Heat and Mass Transfer, 2020.10, SCIE/EI;
23. Flow characteristics of the mixer with two layers impellers in wastewater treatment. Fresenius Environmental Bulletin, 2019, 28(2A), 1569-1574.(SCI) 24. 新型多叶轮潜水搅拌机流场特性, 排灌机械工程学报，2019.37（3）. 25. Flow characteristics of the new type of mixer in wastewater treatment., International Journal of Heat and Technology, 2018, 36, 913-918. EI检索 26. 污水处理搅拌机局部流场PIV实验研究, 中国农村水利水电, 2015, (10), P35-37 27. Matching Criterion of Submersible Mixer and Pool. Advances in Mechanical Engineering, Advances in Mechanical Engineering, 2014.4; （SCI检索） 28. A Study on Two-Phase Flow of Multiple Submersible Mixers Based on Rigid-Lid Assumption. Advances in Mechanical Engineering, 2014.5; （SCI检索） 29. 潜水搅拌机射流特性. 宁夏大学学报, 2014, 35(3), 221-228;(核心期刊) 30. 潜水搅拌机内部压力脉动特性分析. 排灌机械工程学报, 2014,32(7),606-610; (核心期刊) 31. .The characteristics of two-blade Submersible Mixers’ flow field inner the pool. PRZEGLAD ELEKTROTECHNICZNY, 2013, 89（3b）； 32. Comparison of sewage treatment mixer in three pool face boundary conditions. Applied Mechanics and Materials, 2013 (457): 979-983;（EI检索） 33. 2叶片潜水搅拌机叶轮内部流场特性. 江苏大学学报，2013, 34(4),395-398;(核心期刊) 34. 潜水搅拌机分布对污水处理池搅拌效果的影响. 排灌机械工程学报，2013.31（2）,1-5;(核心期刊) 35. Inner flow field of pool mixed by three submersible mixers. Journal of Advanced Manufacturing Systems，2012, 11(2): 91-97;（EI检索） 36. Efficiency calculation of submersible mixer. Advances in Information Sciences and Service Sciences，2012, 4（19）, 421-428;（EI检索） 37. Shi WeiDong, Tian Fei, Lu XiNing, Gao Yi, Ou Mingxiong. Strength analysis of the submersible mixer. Applied Mechanics and Materials, 2012, 197, 18-23（EI检索） 38. Fiber Orientation and Rheology Behavior of the Laminar Suspension Flow through a 2-D Curved Expansion Duct. PRZEGLAD ELEKTROTECHNICZNY, 2012, 88(9B), 70-74;(SCI 检索); 39. One-way Coupling of Fiber Suspensions Through a Rotating Curved Expansion Duct. Thermal Science, 2012, 16(5), 1405-1409 ; (SCI检索) 40. 污水处理潜水搅拌机效率的理论计算与模拟分析. 农业工程学报, 2012,28(12), 50-54;（EI检索） 41. 三叶片潜水搅拌机的数值模拟研究. 排灌机械工程学报, 2012, 30 (1)，4-8;（EI检索） 42. 带导流壳的污水处理搅拌机流动分析与试验. 农业机械学报，2011，（03）：96-99;（EI检索） 43. Tian Fei, Shi Weidong, He Xiuhua, Jiang Hua, Xu Yuanhui. Study on installation of the submersible mixer. IOP Conference Series: Materials Science and Engineering, 2013 (52) ;大会报告（EI检索） 44. Study on Velocity Distribution in a Pool by Submersible Mixers. IOP Conference Series: Earth and Environmental Science, 2012(15);大会报告（EI检索） 45. Mixing performance of sewage treatment mixer at different rotational speed. ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, 2011(6), 825-830;大会报告（EI检索）
| 
