Master's Degree Pogram in Power Engineering and Engineering Thermophysics

Discipline code: 0807

Discipline overview and research direction

The discipline of Power Engineering and Engineering Thermophysics of Jiangsu University relies on the discipline of power engineering, which relies on the construction of fluid machinery engineering technology research center, energy and power engineering college, automobile and traffic engineering college and Energy Research Institute of Jiangsu University. It is an advantageous discipline of Jiangsu University and a first-class key discipline cultivation and construction site of Jiangsu Province. It has the national key discipline of fluid machinery and engineering and the state Water pump and system engineering technology research center, high-end fluid machinery equipment and technology innovation and intelligence introduction base, national experimental teaching demonstration center of energy and power engineering, 7 provincial and ministerial engineering centers and key laboratories. In 1998, it set up a post doctoral research flow station and was authorized by the first batch of masters of engineering. In 2003, it was awarded the first level discipline doctoral program. Fluid machinery and engineering was awarded a master's degree in 1984 and a doctor's degree in 1996. It is a national key discipline in the 10th Five Year Plan and 11th five year plan. In 1984, the doctoral program of power machinery and engineering was specially approved. In 1987, it was the key discipline of the former Ministry of machinery. In 1993, it was awarded the key discipline of Jiangsu Province. This subject is affiliated to the drainage and irrigation machinery branch of China Agricultural machinery society, and is the technical centralized unit of national sprinkler irrigation machinery, small submersible pump and other industries. There are 217 full-time teachers, including 2 academicians of the two academies, professors and researchers 58, one winner of the National Science Fund for Distinguished Young Scholars, one science and technology innovation award of He Liang and he Li foundation, one member of the discipline evaluation group of the State Council, one vice chairman of the energy and power professional teaching steering committee of the Ministry of education, and the chief science of middle-aged and young people in the "333 project" of Jiangsu Province 1 family, 4 young and middle-aged leading talents in science and technology, etc. In recent years, it has won 5 second prizes for national science and technology progress, more than 30 first and second prizes for provincial and ministerial science and technology progress, 2 second prizes for national teaching achievements and 1 second prize for Chinese graduate education achievements. More than 10 key projects of NSFC, International (regional) cooperative research projects of NSFC, National 863 program and national science and technology support program have been approved.

The main research directions of this subject are as follows:

1. Internal flow theory and modern design method of fluid machinery; 2. Energy saving technology of pump and pumping station engineering and system; 3. Combustion and energy utilization of thermal machinery; 4. Multiphase flow and complex flow in fluid machinery and engineering; 5. Working process and emission control of power machinery; 6. Mechanical design theory and technology of chemical process.

Training objectives

1、Love the motherland, support the leadership of the Communist Party of China, support the socialist system, abide by discipline and law, have good moral character, and serve the socialist construction.

2、Master solid basic theories and systematic specialized knowledge of the subject, have the ability to engage in scientific research or independently undertake specialized technical work, and have new insights in science or specialized technology. Master a foreign language and have the ability to carry out academic research and academic communication in a foreign language.

3、physical and psychological health.

Training modes and the duration of study

Postgraduate Studies adopt the Credit system which consists of degree courses and non-degree courses. Master’s degree of a subject requires a minimum of 26 credits, including a minimum of 14 credits of degree courses and at least one full English course. In addition, practice credits 6 (not part of course credits) are also required. Mentors may add course credits if required. Professional elective courses can be selected related to the discipline outside the school, which should rank higher than our school or correspond to our school, or its top QS international rankings 200. Before studying, you should go to the College of Power Engineering and Thermal Physics and Graduate School for the record. Others can be found on the ‘Jiangsu University system providing a set number of proposals for graduate programs.’ Among them is the studying-abroad Master's comprehensive assessment without the requirements of proportion of ‘suspended’.

Generally from three years up to five years. If the full-time academic graduate student graduates apply for six months in advance, you can refer to ‘Jiangsu University on the (repair) system of postgraduate training programs a number of opinions.’

Course credits

Credit requirements

The total credits of the course shall be no less than 26 credits, including no less than 14 credits for degree courses and no less than 12 credits for elective courses.

Curriculum

Note: Please specify the type of the course { English taught course, bilingual course, cutting-edge lecture or experimental course}、、

Extended credit requirements

Graduate students must participate in a certain amount of quality improvement activities during the study period, and obtain at least 3 extended credits. Ways to obtain extended credit are:

1、Participate in social practice activities such as supporting education and poverty alleviation for at least 3 months.

2、Participated in national and provincial postgraduate innovation practice competitions and won the third prize or above (ranked top three).

3、Take the overseas language test with ielts 6.0 or above, TOEFL 80 or above, GRE 250 or above (full score 340), or GMAT 590 or above (full score 800).

4、Overseas scientific research and study exchange (doctoral candidate at least one year).

5、To participate in and pass the national recognized high skill-based qualification examination prescribed by each discipline, the name of the examination subject shall be determined by each discipline and reported to graduate School for the record.

6、Participate in all kinds of social welfare labor or volunteer service activities, each activity 1-2 credits (according to the activities involved, influence and other factors comprehensively determined), at the beginning of each semester, each school will submit the activity content to the research department for review and record and determine the credits, at the end of the activities submitted to the list of students to be identified. Activity credits can be accumulated.

7、In addition to the requirements of the training plan, students should also take public elective courses or use high-quality MOOCs resources at home and abroad for systematic study and pass the test (credits will be directly recognized according to course credits).

8、Other ways of obtaining credits that are conducive to strengthening graduate moral education, physical education, aesthetic education and labor education as stipulated by the discipline (should be submitted to graduate School for review and filing in advance).

Practice credit requirements

Students and postgraduates (excluding on-the-job employees) must take at least one month of practice during school (generally including teaching practice, clinical practice, production practice and social investigation, etc.).

Dissertation and degree requirements

1. Thesis proposal Thesis proposal is the most important step in graduate student's thesis development. Master students who have passed the examination of the thesis opening report can apply for submission for defense one year (at least 8 months). For specific requirements, please refer to "Requirements and Assessment Methods for Topic Selection and Thesis Proposal of Graduate Dissertations of Jiangsu University".

2. Scientific research training and achievements Graduate students are required to participate in scientific research training during the study period, and obtain certain points for scientific research training achievements. For specific requirements, please refer to "Regulations of Jiangsu University on Completing Scientific Research Training Points for Graduate Students during Study".

3. Mid-term report Graduate students should make interim report in the middle of dissertation work. The specific method is: by the school designated responsible person to organize not less than 3 vice senior and above professional title of experts to form an assessment group (including the leading division), hold a public report, graduate students on the work of the paper to carry out a comprehensive introduction, assessment team members point out the existing problems, and put forward suggestions for improvement. The report meeting shall be recorded in detail. The assessment team shall give comments and results according to the mid-term research work of graduate students, and fill in the examination form, which shall be signed by the person in charge of the assessment team and submitted to the dean in charge of the school for review. Those who fail to pass the mid-term report should make clear that the paper work should be extended, and organize the mid-term report again until it is passed.

4. Thesis writing The dissertation must be completed independently by the graduate student under the guidance of the supervisor. Please refer to The Requirements for Writing the Dissertation for Graduate Students of Jiangsu University.

5. Thesis evaluation and defense Graduate students who meet the requirements of course learning, ability development, training, thesis proposal and mid-term report can enter the dissertation submission and defense (including pre-defense). For the requirements of dissertation submission and defense, please refer to The Implementation Rules of Degree Conferment of Jiangsu University and The Procedures for Dissertation Submission of Graduate Students of Jiangsu University.

Other Requirements

Refer to ‘Academic Master Training Program of Jiangsu University (General)’.

Appendix: Catalogue of professional journals to be read

Main Classic works

1. Theory and Technology of Pump. Yuan Shouqi, Shi Weidong, Liu Houlin eds. Machinery Industry Press, 2014

2. Centrifugal Pump Design and Performance. David Japikse. Concepts ETI, Inc.

3. Hydrodynamics of Pumps. Brennen. Christopher E. Oxford: Oxford University Press, 1994

4. Pump Handbook (Third Edition). Igor J. Karassik. Sinopec GroupPress, 2002

5. Introduction to Combustion Engineering. Huo Ran. University of Science and Technology of China Press, 2001

6. The Calculation of Heat Transfer of the Modern Progress. Tao Wenquan. Science Press, 2000

7. Axial Flow Pump and Diagonal Flow Pump: Design and Test of Hydraulic Model and Engineering Application.

8. Design and Optimization for Fluid Machinery. Luo Xianwu, Ji Bin, Xu Hongyuan edited. Tsinghua University Press, 2012

9. Theory and Method for Fluid Mechanical Design. Qi Xueyi edited. China Water & Power Press, 2008

10. The pump fluid mechanics. Christopher Earl Brennan, Zhongyong Pan (ed.). Jiangsu University press, 2012

11. Foundation of Pump Cavitation. Pan Zhongyong, Yuan Shouqi ed. Jiangsu University Press, 2013

12. Pump Manual (3rd Edition). Igor J. Karassik et al. Sinopec Press, 2002

13. Engineering Handbook for Noise and Vibration Control. Ma Dalai. Machinery Industry Press, 2002

14. Monitoring and Fault Diagnosis for Rotating Machinery Vibration. Zhang Zhengsong. Machinery Industry Press, 1991

15. Vibration Test Technology of Fault Diagnosis. Kouhui Metallurgical Industry Press, 1999

16. Chemical Fluid Flow and Heat Transfer. Chai Chengjing, Zhang Guoliang. Chemical Industry Press, 2004

17. Selection and Design of Chemical Equipment. Liu Daode. Central South University Press, 2003

18. Hydraulic Machinery Testing Technology. Li Jianwei. Machinery Industry Press, 1981

19. The principle and application of fluid sealing technology. Heinz K Miller, Chuanqing Cheng. Mechanical Industry Press, 2002

20. Theory and Technology for Water-saving Irrigation. Luo Jinyao. Wuhan University Press, 2003

21. Theory and Technology for Water-saving Irrigation. Li Yuanhua. Wuhan Water & Power Press, 1999

22. Spray Irrigation Technology and Equipment. Yuan Shouqi, Li Hong, Wang Xinkun, edited by Liu Junping. China Water & Power Press, 2015

23. Technology of Sprinkler Irrigation. Chen carving, Lin Zhong Hui. Science Press, 1992

24. Combustion and mass transfer. Sibaierding (d.b.spalding). National Defense Industry Press., 1984

25. Numerical Heat Transfer (2nd edition). Tao Wenquan. Xi'an Jiaotong University Press, 2003

26. Fluidization. Davidson, Harrison (Chinese version). Science Press, 1981

27. Cavitation and Bubble Dynamics. Written by Christoph Ers Brennan, translated by Wang Yong, Pan Zhongyong, Jiangsu University Press, 2013

28. Clean Coal Combustion. Mao Jianxiong. Science Press, 2000

29. Calculation of heat transfer. Tianmo, Yuenan Chen, Zhengqiao fan, Shanmin Chen. Science Press, 1987

30. Foundation and Application for Solar Energy. Liu Jianmin. Edited by Japan Solar Energy Society. Shanghai Scientific & Technical Publisher, 1982

31. Principles and Equipment of Coal Gasification, Wang Tongzhang, Machinery Industry Press, 2002

32. Clean Coal Power Generation Technology. Yan Weiping. China Electric Power Press, 2002

33. Technology for Pressurized Fluidized-bed Combined Cycle Power Generation. Zhang Mingyao. Southeast University Press, 1998

34. Theory and Technology for Gas-solid Separation. Cen Kefa. Zhejiang University Press, 1999

35. Foundation and Application for Fluidization Technology. Wu Zhansong, Ma Runtian, Wang Zhanwen. Chemical Industry Press, 2006

36. Technology for Gas Purification. Xu Shisen, Li Chunhu, Gao Shi Wang. Chemical Industry Press, 2006

37. Technology for Fluidized-bed Combustion. Liu Dechang. China Electric Power Press, 1995

38. Granular Filtration of Aerosols and Hydrosols. Tien C H. Butterworths, 1989

39. Fluidization. Grace J R, Matsen J M. Plenum Press, 1980

40. Numerical calculation of heat transfer and fluid flow Patanka (s.v. patankar). Science Press, 1984

41. Viscous Fluid Mechanics. Zhang Zixiong, Dong Zengnan. Tsinghua University Press, 1999

42. Two-phase Fluid Dynamics. Liu Dayou. Higher Education Press, 1993

43. Introduction to Fluid Dynamics. G.K. Bacchel. Science Press, 1997

44. Introduction to Computational Fluid Dynamics John D. Anderson, JR. Tsinghua University Press, 2002

45. General Design of Internal Combustion Engines, edited by H. Liszt and A. Kissinger, translated by Gao Zongying, Machinery Industry Press, 1986

46. Combustion Engines Development. Gunter P. Merker. Springer, 2012

47. Advanced Internal Combustion Engine. Tang Kaiyuan, Ouyang Guangyao. National Defend Industry Press, 2008

48. Advanced Internal Combustion Engine. Wei Chunyuan. Beijing Institute of Technology Press, 2001

49. Advanced Internal Combustion Engine Principle. Jiang Deming. Xi'an Jiaotong University Press, 2002

50. Advanced Internal Combustion Engine Principle of Automobile. Jiang Deming, Chen Changyou. Xi'an Jiaotong University Press, 2006

51. Internal Combustion Engine (volume 2) .S.Pischinger. Springer, 2010

52. Flame and Combustion (Third edition). J. F. Griffiths, J. A. Barnard, 1995

53. Combustion and Emissions for Internal Combustion Engine. Jiang Deming. Xi'an Jiaotong University Press, 2001

54. Chip Fluid Flow for Microfluidic. Li Zhanhua, Wu Jiankang, Hu Guoqing. Science Press, 2012

55. Micron / Nanoscale Heat Transfer. Edited by Liu Jing. Science Press, 2006

56. Multi-scale Simulation of Complex Fluid Systems of Particles. Li Jinghai, Ouyang Jie, Gao Shiqiu. Science Press, 2005

57. Enhanced Heat Transfer. Gu Weizao. Science Press, 1990

58. Enhanced Heat Transfer Technology. Lin Zonghu eds. Chemical Industry Press, 2007

59. Field Synergy Principle and Enhanced Heat Transfer Technology. Guo Zengyuan, Huang Su et al. China Electric Power Press, 2004

60. Two-phase Flow and Boiling Heat Transfer. Lu Zhongqi ed. Tsinghua University Press, 2002

61. Engineering Heat and Mass Transfer. Wang Buxuan. Science Press, 1998

62. Boiling Heat Exchanger. Lin Ruitai ed. Science Press, 1988

63. Boiling Heat Transfer and Enhancement. Xinming Dao ed. Chongqing University Press, 1987

64. Combustion Theory and Combustion Equipment. Xu Xuchang, Lu Junfu, Zhang Hai. Science Press, 2012

65. Introduction to Combustion: Concepts and Applications. Stephen T. Turns ed. Translated by Yao Qiang, Li Shuiqing, Wang Yu, Tsinghua University Press, 2009

66. Principles of Combustion. K K Kuo. Wiley-Interscience, 2005

67. Combustion. Glassman I, Yetter R. Academic Press, 2008

68. Combustion Theory. F.A. Williams. The Benjamin / Cummings Publishing Company, Inc, 1985

69. Combustion Physics. C.K. Law, Cambridge University Press, 2006

Major foreign academic journals

1. Science China

2. Journal of Internal Combustion Engines (JICE)

3. Chinese Internal Combustion Engine Engineering

4. Journal of Combustion Science and Technology

5. Thermal power generation

6. Journal of Engineering for Thermal Energy and power

7. Journal of Fluid Machinery

8. Journal of Power Engineering

9. Journal of Engineering Thermophysics

10. Chinese Journal of Applied Mechanics

11. Journal of Refrigeration

12. Boiler Technology

13. Advances in Mechanics

14. Environmental Science

15. Journal of Mechanical Engineering

16. Acta Aerodynamics Sinica

17. Chinese Journal of Theoretical Applied Mechanica

18. Journal of China Coal Society

19. Transactions of the Chinese Society of Agricultural Engineering

20. Transactions of the Chinese Society for Agricultural Mechanics

21. Journal of Fuel Chemistry and Technology

22. Journal of Hydrodynamics

23. Solar Energy Journal

24. Acta Armamentarii

25, Journal of Semiconductors

26. Chinese Journal of Bioengineering

27. Automotive Engineering

28. Journal of Vibration Engineering

29. Proceedings of the CSEE

30. Journal of Chemical Industry and Engineering (China)

31. Acta Acustica

32. Journal of Irrigation Mechanical Engineering

33. Journal of Hydraulic Engineering

34. Advances in Water Science

35. Journal of Water-saving irrigation

36. Explosion and Shock Waves

37. Chinese Science Bulletin

38.Journal of Aerospace Power