Educational background

2017.09 - 2021.06 Shanghai Jiao Tong University, Engineering Thermo-physics, PhD

2012.09 - 2016.01 Aswan University, Faculty of Energy Engineering, Mechanical Engineering, Master

2006.09 - 2011.07 Aswan University, Faculty of Energy Engineering, Mechanical Engineering, Bachelor

Professional experience

2025.06 - Present Jiangsu University, School of Energy and Power Engineering, Associate Professor
2024.10 – 2025.05 Northwestern Polytechnical University, School of Power and Energy, Postdoc
2022.11 – 2024.09 Jiangsu University, School of Energy and Power Engineering, Postdoc
2021.09 – 2022.10 Aswan University, Faculty of Energy Engineering, Assistant Professor
2016.10 – 2021.08 Aswan University, Faculty of Energy Engineering, Assistant Lecturer

2011.12 – 2016.09 Aswan University, Faculty of Energy Engineering, Teaching Assistant

Research interest

1.Cryogen spray flash evaporation cooling

2.Spatio-temporal evolution of unsteady flow

3.Advanced gas turbine internal cooling technology

4.Advanced engine combustion through renewable fuels

5.Advanced thermal management of high-power electronics

Research projects

1.国家自然科学基金委员会，青年科学基金项目，W2433130，用于大功率电子冷却的扫描制冷剂喷雾的基础研究，2025.01.01 至 2025.12.31，20万元，进行中，负责人。

2.陕西省博士后科研资助项目，W016328，扫掠制冷喷雾技术的高功率电子设备先进冷却，2024.10.01 至 2025.05.31，5万元，负责人。

3.江苏省优秀博士后人才资助计划，批准号，2023ZB875，电子器件闪蒸喷雾冷却液滴-蒸汽相互作用的非定常分析，2023.06.01 至 2024.05.31，30万元，负责人。

4.国家自然科学基金委员会，重大研究计划，92052107，融合TR-SPIV，PLIF，PSP技术的沙丘涡控下横向 射流的旋涡动力学实验研究，2021.01.01 至 2023.12.31，100万元，在研, 参与。

5.国家自然科学基金委员会，青年科学基金项目，51806138，基于快响应压敏漆PSP和高频响Stereo-PIV 实验测量的振荡来流下气膜冷却时空演变的研究，2019.01.01 至 2021.12.31，25万元，结题，参与。

Selected publications

1.Mohamed Qenawy, Yuchen Zhu, Mona Ali, Jiameng Tian, Hengjie Guo, Junfeng Wang, Bin Chen, 2026, “Flow structure and unsteady dynamics of R134a flash evaporation in sweeping nozzle: toward enhanced spray flashing control”, Energy Conversion and Management, vol. 348 (Part B), p. 120704.

2.Mohamed Qenawy, Shizhao Zhang, Yonghui Qiao, Hengjie Guo, 2025, “Experimental investigation of near-critical ammonia injections using ECN Spray M injector”, Fuel, vol. 402, p. 136021.

3.Mohamed Qenawy, Mona Ali, Yiqi Chen, Yuchen Zhu, Si Chen, Jiameng Tian, Junfeng Wang, Bin Chen, Hengjie Guo, 2025, “Coaxial Airflow modulation for cryogen spray cooling: Towards heat transfer enhancement and film control in laser dermatology”, Int. J. Heat Mass Transf., vol. 244, p. 126969.

4.Mohamed Qenawy, Tianyuan Liu, Mona Ali, Hengjie Guo, 2025, “Enhancement of film cooling effectiveness fed by internal crossflow using inlet expansion standard shaped hole”, Appl. Therm. Eng., vol. 273, p. 126550.

5.Hengjie Guo, Shizhao Zhang, Mohamed Qenawy, Lubing Xu, Yanfei Li, 2025, “Investigation on structural characteristics of shock cells in highly superheated flash boiling jets”, Appl. Therm. Eng., vol. 278 (Part C), p. 127370.

6.Mona Ali, Mohamed Qenawy, Zicheng Hu, Hany S. El-Mesery, 2025, “Numerical investigation of jet-in-crossflow approach for enhanced forced air-cooling of photovoltaic panels”, Applied Thermal Engineering, vol. 263, p. 125358.

7.Nouralddin H.A. Fayez, Mohamed Qenawy, Hassan M.M. Mustafa, Mohamed Taha, A.H. Abdelbaky Elbatran, 2025, “Experimental analysis of performance and emission characteristics of HHO-LPG dual fuel additives for gasoline engines”, Int. J. Hydrogen Energy, vol. 189, p. 152118.

8.Si Chen, Mohamed Qenawy, Jiameng Tian, Zhentao Wang, Hai Wang, Kai Yu, Junfeng Wang, Bin Chen, Junhui Xiong, 2025, “From principles to practice: Review of recent advances and perspectives in spray flash evaporation technology towards thermal management of energy systems”, Energy Conversion and Management, vol. 326, p. 119499.

9.Yiqi Chen, Jiameng Tian, Haofan Peng, Changqiu He, Yuchen Zhu, Mohamed Qenawy, Benan Cai, Junfeng Wang, Bin Chen, 2025, “Enhancing flashing spray cooling with eco-friendly R1234yf through intermittent spurt coupled with cold air jet”, App. Therm. Eng., vol. 279 (Part A), p. 127505.

10.Hany S. El-Mesery, Mohamed Qenawy, Ahmed H. ElMesiry, Mona Ali, Oluwasola Abayomi Adelusi, Zicheng Hu, Ali Salem, 2025, “Application of experimental, numerical, and machine learning techniques to improve drying performance and decrease energy consumption infrared continuous dryer”, Case Studies in Thermal Engineering, vol. 69, p. 106025.

11.Hany S. El-Mesery, Mohamed Qenawy, Ahmed H. ElMesiry, Mona Ali, Zicheng Hu, Mansuur Husein, Ali Salem, 2025, “Computational intelligence and machine learning Approaches for performance evaluation of an infrared dryer: Quality analysis, drying kinetics, and thermal performance”, Journal of Stored Products Research, vol. 112, p. 102639.

12.Hany S. El-Mesery, Mohamed Qenawy, Mona Ali, Merit Rostom, Ahmed Elbeltagi, Ali Salem, Abdallah Elshawadfy Elwakeel, 2025, “Optimization of dried garlic physicochemical properties using a self-organizing map and the development of an artificial intelligence prediction model”, Scientific Reports, vol. 15, p. 3105.

13.Mohamed Qenawy, Yiqi Chen, Yuchen Zhu, Mona Ali, Junfeng Wang, Jiameng Tian, Bin Chen, 2024, “A novel coaxial air-R134a spray cooling for heat transfer enhancement of laser dermatology”, Int. J. Heat Mass Transf., vol. 233, p. 126057.

14.Mohamed Qenawy, Yiqi Chen, Junfeng Wang, Jiameng Tian, Bufa Li, Bin Chen, 2024, “Transient behavior of liquid film deposition and surface heat transfer upon cryogen-spray cooling coupled with cold air jet”, Int J Heat Mass Transf., vol. 223, p. 125224.

15.Mohamed Qenawy, Yiqi Chen, Junfeng Wang, Jiameng Tian, Bin Chen, 2024, “Intermittent cryogen spray cooling coupled with cold air jet for heat transfer enhancement and cryogen saving of laser dermatology”, Physics of Fluids, vol. 36, p. 023304.

16.Mohamed Qenawy, Yiqi Chen, Yuchen Zhu, Junfeng Wang, Jiameng Tian, Bin Chen, 2024, “Improving fluid flow and heat transfer of cryogen spray cooling using sweeping cold air jet”, Physics of Fluids, vol. 36, p. 043302.

17.Mohamed Qenawy, Mona Ali, Hany S. El-Mesery, Zicheng Hu, 2024, “Analysis and control of hybrid convection-radiation drying systems toward energy saving strategy”, Journal of Food Science, vol. 89(12), pp 9559-9576.

18.Mohamed Khalaf, Mohamed Qenawy, Tiemin Xuan, 2024, “Experimental investigation on the performance and emissions of extracted biodiesels from mixed Jatropha-Castor seeds: Comprehensive assessment”, Applied Energy, vol. 374, p. 124022.

19.Mohamed Khalaf, Tiemin Xuan, Mohamed Qenawy*, Hassan M.M. Mustafa, Hany S. El-Mesery, Mohamed F.C. Esmail, 2024, “Investigation and optimization of bio-oil extraction from mixed Jatropha-Castor seeds using screw-pressing methodology”, Process Safety and Environmental Protection, vol. 188, pp 217–229.

20.Hany S. El-Mesery, Mohamed Qenawy, Mona Ali, Zicheng Hu, Oluwasola Abayomi Adelusi, Patrick Berka Njobeh, 2024, “Artificial intelligence as a tool for predicting the quality attributes of garlic (Allium sativum L.) slices during continuous infrared-assisted hot air drying”, Journal of Food Science, vol. 89(11), pp 7693-7712.

21.Hany S. El-Mesery, Mona Ali, Mohamed Qenawy, Oluwasola Abayomi Adelusi, 2024, “Application of artificial intelligence to predict energy consumption and thermal efficiency of hybrid convection-radiation dryer for garlic slices”, Engineering Applications of Artificial Intelligence, vol. 138 (Part A), p. 109338.

22.Mohamed Qenawy, Junfeng Wang, Jiameng Tian, Bufa Li, Bin Chen, 2023 “Investigation of unsteady flow behavior of cryogen-spray coupled with cold air jet,” Appl. Therm. Eng., vol. 235, p. 121406.

23.Mohamed Qenawy, Mohamed Taha, and Ali Elbatran, 2023, “Effects of Hole-Inlet Velocity on the Adiabatic Film Cooling Effectiveness Behind Crossflow-Fed Shaped Holes,” Appl. Therm. Eng., vol. 222, p. 119927.

24.Mohamed Qenawy, Hany S. El-Mesery, Junfeng Wang, Salama Abdelhady, 2023, “Design and thermal performance analysis of concentrating solar power tower for water heating systems”, Case Studies in Therm. Eng., vol. 48, p. 103141.

25.Mohamed Qenawy, Mohammed Khalaf, Junfeng Wang, Jiameng Tian, Lei Zuo, Hassan M.M. Mustafa, Mohamed F.C. Esmail, 2023, “Performance and emission of extracted biodiesel from mixed Jatropha-Castor seeds”, Fuel, vol. 357, p. 130060.

26.Jiameng Tian, Yiqi Chen, Changqiu He, Zhentao Wang, Mohamed Qenawy, Junfeng Wang, Bin Chen, Junhui Xiong, 2023, “Unstable spray pattern and cooling performance of cryogen spray coupled with cold air jet: An experimental study”, Physics of Fluids, vol. 35, p. 123333.

27.Mohamed Qenawy, Mohamed Taha, and Ali Elbatran, 2022, “Unsteady Adiabatic Film Cooling Effectiveness Behind Shaped Holes”, Case Studies in Therm. Eng., vol. 34, p. 102005.

28.Mohamed Qenawy, Wenwu Zhou, and Yingzheng Liu, 2022, “Effects of Crossflow-Fed-Shaped Holes on the Adiabatic Film Cooling Effectiveness,” Int. J. Thermal Sciences., vol. 177, p. 107578.

29.Wenwu Zhou, Hongyi Shao, Mohamed Qenawy, Di Peng, Hui Hu, and Yingzheng Liu, 2022, “Improved Turbine Vane Endwall Film Cooling by Using Sand-Dune-Inspired Design”, J. Thermal Science, vol. 31, pp. 958-973.

30.Hongyi Shao, Mohamed Qenawy, Tianlun Zhang, Di Peng, Yingzheng Liu, and Wenwu Zhou, 2021, “Experimental Study of Oscillating Freestream Effect on the Spatio-Temporal Distributions of Leading-edge Film Cooling”, ASME J. Turbomach., vol. 143, p. 011002.

31.Mohamed Qenawy, Lin Yuan, Yingzheng Liu, Di Peng, Xin Wen, and Wenwu Zhou, 2020, “A Novel Single-passage Transonic Wind-tunnel for Turbine-vane Film Cooling”, ASME J. Eng. Gas Turbines Power, vol. 142, p. 071009.

32.Mohamed Qenawy, Han Chen, Di Peng, Yingzheng Liu, and Wenwu Zhou, 2020, “Flow Structures and Unsteady Behaviors of Film Cooling from Discrete Holes Fed by Internal Crossflow”, ASME J. Turbomach., vol. 142, p. 041007.

33.Wenwu Zhou, Mohamed Qenawy, Hongyi Shao, Di Peng, Xin Wen, and Yingzheng Liu, 2020, “Turbine Van Endwall Film Cooling with Barchan-dune Shaped Ramp in a Single-passage Transonic Wind-tunnel”, Int. J. Heat and Mass Transf., vol. 162, pp. 1-13.

34.Wenwu Zhou, Mohamed Qenawy, Yingzheng Liu, Xin Wen, and Di Peng, 2019, “Influence of Mainstream Flow Oscillations on Spatio-temporal Variation of Adiabatic Film Cooling Effectiveness”, Int. J. Heat and Mass Transf., vol. 129, pp. 569-579.

Honors and Awards

2025 NSFC young researcher

2024 AIP Publishing Annual Highlight Award of China

2017 Chinese Government Scholarship (Shanghai Jiao Tong University)

Other professional activities

·Engineering consultant manager at Aswan University, 2021-2022.

·International academic conferences (e.g., ASME Turbo Expo, GPPS) 2019.

·Assigned lecturer at Arab Academy for Science, Technology and Maritime Transport, 2021-2022.

·International cooperation with Erasmus Plus European Union (SureMap 2021, GECB 2020, Desire 2018).

·Reviewer for Fuel, Physics of fluids, International Journal of Heat and Mass Transfer, Applied Thermal Engineering, Process Safety and Environmental Protection, Renewable and sustainable energy review.