Training Plan for Master Degree in Power Engineering and Thermal Physics

Discipline code: 0807

I. General Situation and Research Direction of Discipline

Jiangsu University’s Department of Power Engineering and Engineering Thermal Physics depend on Power Engineering, and is based on the Research Center of Fluid Machinery Engineering and Technology in Jiangsu University as well as College of Energy and Power Engineering and College of Automobile and Traffic Engineering construction. It is a prominent discipline and national key discipline in construction and cultivation in Jiangsu. Jiangsu University has national key disciplines in Fluid Machinery Engineering, Technology Research Center of National Water Pump System Engineering and 5 provincial Engineering Centers and key laboratories.

In 1998, a post-doctoral research rover was established and awarded authorization for the first batch of masters in engineering fields. In 2003, it was awarded a Ph.D. in Fluid mechanics and engineering disciplines and in 1984 received a master's pilot and a doctoral pilot in 1996, it is part of "the tenth Five-Year Plan" and "the Eleventh Five-Year Plan" of national key disciplines. Power Machinery and Engineering disciplines was given special approval to doctoral program in 1984 and key disciplines in 1993 by the Jiangsu province.

There are currently 145 full-time Teachers, including 2 Chair Fellows, 37 Professors and Researchers, 1 National Outstanding Youth Fund winner, 1 National "million project" expert, 1 Ho Leung Ho Lee Foundation Science and Technology Innovation Award , a member of Discipline Review Group under the State Council, a Vice Chairman of the Teaching and Steering Committee of the Energy and Power Specialty under the Ministry of Education, 2 State-level candidates for the "Project of Millions of Talents" in new century, a Chief Scientist of "333 Project" of young and middle-aged in Jiangsu Province, 4 young and middle-aged science and technology leaders and so on. In recent years, achievements of three times second prizes in National Science and Technology Progress, more than 30 first and second prizes in Provincial and Ministerial level Scientific and Technological progress, two second prizes in National Teaching Achievement, one second prize in the first China Postgraduate Education Achievement, National Natural Science Foundation of key projects, the state "863 Program" project, the National Science and Technology Support Program has been won more than ten times.

The main research directions of this subject are as follows:

1. Theory of fluid machinery internal flow and methods of modern design;

2. Pump and pumping station engineering and technology of saving energy system;

3. Thermal mechanical combustion and energy utilization;

4. Fluid machinery and engineering of multiphase flow and complex flow;

5. Power Machinery work process and emission control;

6. Theory of chemical process, mechanical design and technology.

II. Training Objectives

Graduate students should have the correct outlook in life, values and world outlook, keep physical and mental health, obey the rules and laws, have a rigorous style of study, master the disciplines by theory and systematic expertise, possess the ability in scientific writing and international exchange about academics, have the ability to engage in scientific research and technological innovation and development independently, be competent to the work of technology of engineering, scientific research and teaching about the discipline.

III. The Duration of Study and Training Methods

  Generally from two years up to five years. If the full-time academic graduate student graduates apply for six months in advance, you can refer to ‘Jiangsu University on the (repair) system of postgraduate training programs a number of opinions.’

    Postgraduate Studies adopt the Credit system which consists of degree courses and non-degree courses. Master’s degree of a subject requires a minimum of 24 credits, including a minimum of 14 credits of degree courses and at least one full English course. In addition, practice credits 6 (not part of course credits) are also required. Mentors may add course credits if required.

Professional elective courses can be selected related to the discipline outside the school, which should rank higher than our school or correspond to our school, or its top QS international rankings 200. Before study, you should go to the College of Power Engineering and Thermal Physics and Graduate School for the record.

Others can be found on the ‘Jiangsu University system providing a set number of proposals for graduate programs.’ Among them is the studying-abroad Master's comprehensive assessment without the requirements of proportion of ‘suspended’.

Course Category		Course Name	Credit	Term	Course From the School	Remark
Degree Course	Compulsory Subjects for All Students	Overview of China	3	1		Compulsory
		Chinese I	2	1
		Chinese II	2	2
	Fundamental Theories	Numerical Analysis	2	1	School of Science	At least 4 credit
		Mathematical Statistics	2	1	School of Finance
		Matrix	2	1	School of Science
		Viscous Fluid Mechanics	2	2	School of energy and power engineering
		Heat Transfer	2	1	School of energy and power engineering
	Professional Foundation or Specialized Courses	Theory of Thermal Fluid Science	3	1	School of energy and power engineering	Compulsory
Non- degree Courses	Specialized Elective Courses	Renewable Energy	2	2	School of energy and power engineering	Selective
		The Progress in New Technology of the field of power engineering	2	2	School of energy and power engineering
		Advanced Internal Combustion Engine Fundamentals	2	2	School of automobile and traffic engineering
		Advanced Combustion Theory	2	2	School of energy and power engineering
		Emission Control Theory and Technology of ICE	2	2	School of automobile and traffic engineering
		Hydrodynamics of Pumps	2	2	Research Center of Fluids Machinery and Engineering
		Advanced Fluid Engineering Theory and Measuring Technology	2	2	Research Center of Fluids Machinery and Engineering
		Computational Fluid Dynamics: the Basic with Engineering Applications	2	2	School of energy and power engineering
		Advanced Numerical Heat Transfer（I）	2	2	School of energy and power engineering
		Computational Fluid Mechanics	2	2	Research Center of Fluids Machinery and Engineering
		CFD for Fluid Machinery	2	2	Research Center of Fluids Machinery and Engineering
		Flow in Pumps	2	2	Research Center of Fluids Machinery and Engineering
		Design and Optimization of Pumps	2	2	Research Center of Fluids Machinery and Engineering
		Heat Transfer Enhancement and Its Application	2	2	School of energy and power engineering
		Turbulent Combustion and its Application in Engineering	2	2	School of energy and power engineering
		Engine electronic control and management system	2	2	School of automobile and traffic engineering
		Multi-phase Flow in Engineering	2	2	School of energy and power engineering
		All graduate courses in all disciplines of the school			Optional
	Public Selective Course

IV. Requirements for Course Credit

Note: Please distinguish between ‘English’, ‘bilingual’ and ‘experimental platform’ of the nature of the course

V. Requirements for practice credit.

  1. Academic activities: 2 credits. You should take part in more than 10 academic activities, including international academic conferences hosted by foreigners counting as 2 academic activities as well as domestic sponsored international conferences or national academic conference as 1 academic activity.

   2. Reading foreign literature: 2 credits. You should read more than 20 foreign literature.

   3. Participating in seminar: 1 credit. You should participate in more than 1 seminar.

4. Practice part: 1 credit. It is required of more than 1 month of teaching practice and production practice.

    Other specific requirements refer to ‘Academic Master Training Program of Jiangsu University (General).’

VI. The Steering Committee and Guidance

Master students should firstly apply online, and then respective instructors will recruit students through the relevant materials submitted. If the report is received, the individual study plan will be formulated according to the requirements of training plan under the guidance of the instructor. The Steering Committee consists of at least 4 Master Instructors, including a steering committee chairman and at least two of the committee members from the College. The other two committee members can come from other colleges with at least one of whom has the title of a graduate tutor. The Steering Committee is established at the end of the second semester.

VII. Dissertations                                        

 Refer to ‘Academic Master Training Program of Jiangsu University (General)’. Among them, studying Master's comprehensive assessment is without "suspension" of the proportion of requirements.

VIII. Process and Requirements of the Practice

  Practical aspects include teaching practice and professional practice. It is required of graduate students to practice at least one of them. Teaching practice can take a variety of ways, such as undergraduate teaching, counseling or counseling experiments, internships of production, curriculum design and graduation design work. The contents, requirements and schedule of teaching practice are put forward by the instructor, and the corresponding teaching and research department (laboratory) makes specific arrangements. The teaching practice instructor will write out the assessment. After passing the examination, one credit will be awarded. The accumulation of the time for teaching practice is no less than one month of teaching assistant workload. Professional practice includes production practices and social research. With each subject, the appropriate way is determined according to the characteristics of the subject. After professional practice, you should write a summary, and the practice of units will make the corresponding written appraisal.  If the professional practice is completed, you will gain 2 credits.

IX. Other Requirements

 Refer to ‘Academic Master Training Program of Jiangsu University (General)’.

X. Financial Support

 Refer to ‘Academic Master Training Program of Jiangsu University (General)’.

Appendix: the opening report template, the majority of classics and the catalog of academic journals.

No.1 The opening-report template

1. The purpose and basis of the topic, explain the theoretical significance of the topic. Introduce the research situation at home and abroad, and your own ideas as well as the academic and practical value of the subject.

2. Your thought about the work regarding the topic. The specific research content and key issues that need to be addressed. Pointing out areas that will need some further progress and breakthroughs and possible levels to attain.

3. The methods and means that may be adopted in research topics, the framework of basic content of the paper.

4. The problems that may be encountered in the study process and solutions to the plan.

5. The overall arrangement and writing plan of the thesis.

No.2 The main classics

1. Theory and Technology of Pump. Yuan Shouqi, Shi Weidong, Liu Houlin eds. Machinery Industry Press, 2014

2. Centrifugal Pump Design and Performance. David Japikse. Concepts ETI, Inc.

3. Hydrodynamics of Pumps. Brennen. Christopher E. Oxford: Oxford University Press, 1994

4. Pump Handbook (Third Edition). Igor J. Karassik. Sinopec GroupPress, 2002

5. Introduction to Combustion Engineering. Huo Ran. University of Science and Technology of China Press, 2001

6. The Calculation of Heat Transfer of the Modern Progress. Tao Wenquan. Science Press, 2000

7. Axial Flow Pump and Diagonal Flow Pump: Design and Test of Hydraulic Model and Engineering Application.

8. Design and Optimization for Fluid Machinery. Luo Xianwu, Ji Bin, Xu Hongyuan edited. Tsinghua University Press, 2012

9. Theory and Method for Fluid Mechanical Design. Qi Xueyi edited. China Water & Power Press, 2008

10. The pump fluid mechanics. Christopher Earl Brennan, Zhongyong Pan (ed.). Jiangsu University press, 2012

11. Foundation of Pump Cavitation. Pan Zhongyong, Yuan Shouqi ed. Jiangsu University Press, 2013

12. Pump Manual (3rd Edition). Igor J. Karassik et al. Sinopec Press, 2002

13. Engineering Handbook for Noise and Vibration Control. Ma Dalai. Machinery Industry Press, 2002

14. Monitoring and Fault Diagnosis for Rotating Machinery Vibration. Zhang Zhengsong. Machinery Industry Press, 1991

15. Vibration Test Technology of Fault Diagnosis. Kouhui Metallurgical Industry Press, 1999

16. Chemical Fluid Flow and Heat Transfer. Chai Chengjing, Zhang Guoliang. Chemical Industry Press, 2004

17. Selection and Design of Chemical Equipment. Liu Daode. Central South University Press, 2003

18. Hydraulic Machinery Testing Technology. Li Jianwei. Machinery Industry Press, 1981

19. The principle and application of fluid sealing technology. Heinz K Miller, Chuanqing Cheng. Mechanical Industry Press, 2002

20. Theory and Technology for Water-saving Irrigation. Luo Jinyao. Wuhan University Press, 2003

21. Theory and Technology for Water-saving Irrigation. Li Yuanhua. Wuhan Water & Power Press, 1999

22. Spray Irrigation Technology and Equipment. Yuan Shouqi, Li Hong, Wang Xinkun, edited by Liu Junping. China Water & Power Press, 2015

23. Technology of Sprinkler Irrigation. Chen carving, Lin Zhong Hui. Science Press, 1992

24. Combustion and mass transfer. Sibaierding (d.b.spalding). National Defense Industry Press., 1984

25. Numerical Heat Transfer (2nd edition). Tao Wenquan. Xi'an Jiaotong University Press, 2003

26. Fluidization. Davidson, Harrison (Chinese version). Science Press, 1981

27. Cavitation and Bubble Dynamics. Written by Christoph Ers Brennan, translated by Wang Yong, Pan Zhongyong, Jiangsu University Press, 2013

28. Clean Coal Combustion. Mao Jianxiong. Science Press, 2000

29. Calculation of heat transfer. Tianmo, Yuenan Chen, Zhengqiao fan, Shanmin Chen. Science Press, 1987

30. Foundation and Application for Solar Energy. Liu Jianmin. Edited by Japan Solar Energy Society. Shanghai Scientific & Technical Publisher, 1982

31. Principles and Equipment of Coal Gasification, Wang Tongzhang, Machinery Industry Press, 2002

32. Clean Coal Power Generation Technology. Yan Weiping. China Electric Power Press, 2002

33. Technology for Pressurized Fluidized-bed Combined Cycle Power Generation. Zhang Mingyao. Southeast University Press, 1998

34. Theory and Technology for Gas-solid Separation. Cen Kefa. Zhejiang University Press, 1999

35. Foundation and Application for Fluidization Technology. Wu Zhansong, Ma Runtian, Wang Zhanwen. Chemical Industry Press, 2006

36. Technology for Gas Purification. Xu Shisen, Li Chunhu, Gao Shi Wang. Chemical Industry Press, 2006

37. Technology for Fluidized-bed Combustion. Liu Dechang. China Electric Power Press, 1995

38. Granular Filtration of Aerosols and Hydrosols. Tien C H. Butterworths, 1989

39. Fluidization. Grace J R, Matsen J M. Plenum Press, 1980

40. Numerical calculation of heat transfer and fluid flow Patanka (s.v. patankar). Science Press, 1984

41. Viscous Fluid Mechanics. Zhang Zixiong, Dong Zengnan. Tsinghua University Press, 1999

42. Two-phase Fluid Dynamics. Liu Dayou. Higher Education Press, 1993

43. Introduction to Fluid Dynamics. G.K. Bacchel. Science Press, 1997

44. Introduction to Computational Fluid Dynamics John D. Anderson, JR. Tsinghua University Press, 2002

45. General Design of Internal Combustion Engines, edited by H. Liszt and A. Kissinger, translated by Gao Zongying, Machinery Industry Press, 1986

46. Combustion Engines Development. Gunter P. Merker. Springer, 2012

47. Advanced Internal Combustion Engine. Tang Kaiyuan, Ouyang Guangyao. National Defend Industry Press, 2008

48. Advanced Internal Combustion Engine. Wei Chunyuan. Beijing Institute of Technology Press, 2001

49. Advanced Internal Combustion Engine Principle. Jiang Deming. Xi'an Jiaotong University Press, 2002

50. Advanced Internal Combustion Engine Principle of Automobile. Jiang Deming, Chen Changyou. Xi'an Jiaotong University Press, 2006

51. Internal Combustion Engine (volume 2) .S.Pischinger. Springer, 2010

52. Flame and Combustion (Third edition). J. F. Griffiths, J. A. Barnard, 1995

53. Combustion and Emissions for Internal Combustion Engine. Jiang Deming. Xi'an Jiaotong University Press, 2001

54. Chip Fluid Flow for Microfluidic. Li Zhanhua, Wu Jiankang, Hu Guoqing. Science Press, 2012

55. Micron / Nanoscale Heat Transfer. Edited by Liu Jing. Science Press, 2006

56. Multi-scale Simulation of Complex Fluid Systems of Particles. Li Jinghai, Ouyang Jie, Gao Shiqiu. Science Press, 2005

57. Enhanced Heat Transfer. Gu Weizao. Science Press, 1990

58. Enhanced Heat Transfer Technology. Lin Zonghu eds. Chemical Industry Press, 2007

59. Field Synergy Principle and Enhanced Heat Transfer Technology. Guo Zengyuan, Huang Su et al. China Electric Power Press, 2004

60. Two-phase Flow and Boiling Heat Transfer. Lu Zhongqi ed. Tsinghua University Press, 2002

61. Engineering Heat and Mass Transfer. Wang Buxuan. Science Press, 1998

62. Boiling Heat Exchanger. Lin Ruitai ed. Science Press, 1988

63. Boiling Heat Transfer and Enhancement. Xinming Dao ed. Chongqing University Press, 1987

64. Combustion Theory and Combustion Equipment. Xu Xuchang, Lu Junfu, Zhang Hai. Science Press, 2012

65. Introduction to Combustion: Concepts and Applications. Stephen T. Turns ed. Translated by Yao Qiang, Li Shuiqing, Wang Yu, Tsinghua University Press, 2009

66. Principles of Combustion. K K Kuo. Wiley-Interscience, 2005

67. Combustion. Glassman I, Yetter R. Academic Press, 2008

68. Combustion Theory. F.A. Williams. The Benjamin / Cummings Publishing Company, Inc, 1985

69. Combustion Physics. C.K. Law, Cambridge University Press, 2006

No.3 The major professional academic journals

Major Chinese professional academic journals

1. Science China

2. Journal of Internal Combustion Engines (JICE)

3. Chinese Internal Combustion Engine Engineering

4. Journal of Combustion Science and Technology

5. Thermal power generation

6. Journal of Engineering for Thermal Energy and power

7. Journal of Fluid Machinery

8. Journal of Power Engineering

9. Journal of Engineering Thermophysics

10. Chinese Journal of Applied Mechanics

11. Journal of Refrigeration

12. Boiler Technology

13. Advances in Mechanics

14. Environmental Science

15. Journal of Mechanical Engineering

16. Acta Aerodynamics Sinica

17. Chinese Journal of Theoretical Applied Mechanica

18. Journal of China Coal Society

19. Transactions of the Chinese Society of Agricultural Engineering

20. Transactions of the Chinese Society for Agricultural Mechanics

21. Journal of Fuel Chemistry and Technology

22. Journal of Hydrodynamics

23. Solar Energy Journal

24. Acta Armamentarii

25, Journal of Semiconductors

26. Chinese Journal of Bioengineering

27. Automotive Engineering

28. Journal of Vibration Engineering

29. Proceedings of the CSEE

30. Journal of Chemical Industry and Engineering (China)

31. Acta Acustica

32. Journal of Irrigation Mechanical Engineering

33. Journal of Hydraulic Engineering

34. Advances in Water Science

35. Journal of Water-saving irrigation

36. Explosion and Shock Waves

37. Chinese Science Bulletin

38.Journal of Aerospace Power